Candy Packaging Machine SystemsMultihead weigher VFFS baggers, rotary zipper pouch machines, and exact-count jar lines for gummies, hard candy, and lollipops.
Project Brief
HomeCandy Packaging MachinesVFFS Candy Baggers

Vertical Form-Fill-Seal (VFFS) Candy Bagging Machines

Specify intermittent and continuous-motion VFFS candy bagging machines (60–250 mm bag width, 10–120 BPM) for pillow, gusseted, and euro-slot bags.

Rollstock Economics for High-Volume Retail Confectionery

Vertical form-fill-seal (VFFS) baggers unwind flat printed BOPP/CPP or PET/PE laminate film over a stainless forming shoulder, seal the vertical fin/lap seam, drop a weighed candy charge, and close the horizontal jaws in one synchronized servo cycle. Within candy packaging machines, explore pillow and gusset VFFS candy baggers and exact-count multi-lane VFFS machines.

Standard 420/520 intermittent servo frames run 10–70 bags/min on 4.0 kW power, while continuous-motion dual-belt frames reach 90–120 bags/min.

Five-stage confectionery Z-elevator, dimple multihead weigher, and cushioned VFFS/pouch bagging line
Confectionery lines win or lose uptime in the weigher hoppers and transfer chute—anti-stick geometry and drop-height control come first.

VFFS Frame Classes for Confectionery

Select film web width and jaw motion by bag dimensions and target BPM:

VFFS Frame Series Max Film Web Bag Width × Length Speed Envelope Bag Styles Supported
Compact 320 / 420 Servo 320–420 mm W 50–200 mm; L 60–300 mm 15–75 bags/min Pillow, 3-side/back seal, chain bags
Standard JT-520W Intermittent 520 mm W 60–250 mm; L 100–350 mm 10–70 bags/min Pillow, side-gusset, euro-hole peg bag
High-Speed 520 Continuous 520 mm W 60–250 mm; L 50–350 mm 80–120 bags/min High-volume retail pillow & gusset packs
Quad-Seal / Block-Bottom 520/720 520–720 mm W 80–300 mm; stand-up gusset 20–55 bags/min 4-corner edge-sealed retail shelf bag

Compare pre-converted stand-up zipper bags on premade pouch candy machines.

Throughput comparison across rotary zipper pouch, electronic counting, lollipop groove, and 14/20-head candy VFFS machines
Match machine architecture to whether your retail pack sells by reclosable pouch presentation, exact piece count, or high-speed pillow bagging.

Confectionery Engineering Details

  • Euro-Slot & Round Peg-Hole Punches: Retail convenience-store candy racks require clean heated or pneumatic euro-slot punches integrated into the horizontal jaw assembly.
  • Double Servo Film Pull Belts: Vacuum or high-friction double belts advance glossy printed candy laminates without slip, holding eye-mark registration within ±1 mm.
  • Product Settling & Gusset Tucking: Pneumatic bag-shaker plates settle bulky wrapped twists so candy pieces never bridge inside the top cross-seal.

Rollstock Film & Jaw Checks

Confirm film thickness (typically 50–90 μm BOPP/VMCPP or PET/PE), inner core ID (76 mm), and heat-seal jaw serration pitch.

Send your target bag width × length via our Project Brief.

Product giveaway reduction from 5% volumetric overfill down to 0.5% on combinatorial multihead weighers
Cutting average overfill by 3–4 grams per 200 g gummy pouch pays back precision multihead weighing within 12–24 months.

Compare related confectionery systems in Candy Packaging Machines, Weighing & Dosing Specs, or send your candy specs via Project Brief.

In This Section

Related Specifications

Further Reference

Confirm Specifications Against Your Project

Share target throughput, dimensions, and site constraints with Candy Packaging Machine Systems for an itemized engineering check.

Discuss My Candy Line